Dentigerous cyst in the medial wall of maxillary sinus.

This is the image of dentigerous cyst detected in the medial wall of maxillary sinus, a rare location for the mentioned cyst, which emphasizes the superiority of radiographic features from the site of the lesion. Moreover, the present case showed no facial asymmetry despite the extension of the lesion.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Morphology and classification of the second mesiobuccal canal in maxillary first molars: a cone-beam computed tomography analysis in a Chinese population.

BACKGROUND: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age. RESULTS: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05). CONCLUSIONS: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes.

AUTOMATIC CEPHALOMETRIC LANDMARK IDENTIFICATION WITH ARTIFICIAL INTELLIGENCE: AN UMBRELLA REVIEW OF SYSTEMATIC REVIEWS.

OBJECTIVES: The transition from manual to automatic cephalometric landmark identification has not yet reached a consensus for clinical application in orthodontic diagnosis. The present umbrella review aimed to assess artificial intelligence (AI) performance in automatic 2D and 3D cephalometric landmark identification. DATA: A combination of free text words and MeSH keywords pooled by boolean operators: Automa* AND cephalo* AND ("artificial intelligence" OR "machine learning" OR "deep learning" OR "learning"). SOURCES: A search strategy without a timeframe setting was conducted on PubMed, Scopus, Web of Science, Cochrane Library and LILACS. STUDY SELECTION: The study protocol followed the PRISMA guidelines and the PICO question was formulated according to the aim of the article. The database search led to the selection of 15 articles that were assessed for eligibility in full-text. Finally, 11 systematic reviews met the inclusion criteria and were analyzed according to the risk of bias in systematic reviews (ROBIS) tool. CONCLUSIONS: AI was not able to identify the various cephalometric landmarks with the same accuracy. Since most of the included studies' conclusions were based on a wrong 2 mm cut-off difference between the AI automatic landmark location and that allocated by human operators, future research should focus on refining the most powerful architectures to improve the clinical relevance of AI-driven automatic cephalometric analysis. CLINICAL SIGNIFICANCE: Despite a progressively improved performance, AI has exceeded the recommended magnitude of error for most cephalometric landmarks. Moreover, AI automatic landmarking on 3D CBCT appeared to be less accurate compared to that on 2D X-rays. To date, AI-driven cephalometric landmarking still requires the final supervision of an experienced orthodontist.

Sexual dimorphism of maxillary sinuses in adult population using cone-beam computed tomography. A pilot study.

Objective: This study aims to evaluate the sexual dimorphism of maxillary sinuses (MS) using cone-beam computed tomography (CBCT). Method: A total of 80 CBCT scans were taken from Peruvian patients aged between 20 and 70 years-old. The dimensions (length, width, and height) of the MS were measured and evaluated. The data were analyzed using the Mann-Whitney U test with a significance level of p < 0.05. Results: The left MS was wider than the right MS. Meanwhile, the right MS was longer than the left MS. In addition, the height of the right and left MS was significantly different in males and females, with p-value of 0.003 and 0.044 respectively. Bigger dimension of height of the MS was found in patients aged between 30 and 39 as well as patients aged between 40 and 49, whereas smaller dimension of height of the MS was found in patients aged between 60 and 70. Furthermore, the height of the right MS was significantly different in dentate and edentulous patients, with p-value of 0.033 and 0.043 respectively. The height of the right MS was predicted at 65 % in males and 70 % in females (p = 0.002). Conclusion: The morphometry of the maxillary sinuses can be used for predicting sexual dimorphism.

Effectiveness of Occlusal Splint Therapy in Moderating Temporomandibular Joint Disorders With Joint Displacement: A Retrospective Analysis Using Cone Beam Computed Tomography.

Background Temporomandibular joint disorders (TMD) represent a prevalent group of conditions impacting the temporomandibular joint. Among the therapeutic interventions, occlusal splint therapy has gained recognition for its potential to address TMD symptoms, particularly in cases involving joint displacement. Objective This study aims to investigate the effectiveness of occlusal splint therapy in cases of moderate TMD with joint displacement, focusing on changes in condylar position, joint morphology, and patient-reported outcomes. Methods A retrospective analysis was conducted involving 148 participants who underwent occlusal splint therapy between January 2018 and December 2020. Data were collected through cone beam computed tomography (CBCT) imaging for precise assessments of condylar position and joint morphology. Ethical approval was obtained, and participants provided informed consent. Baseline characteristics, medical history, and TMD severity were recorded. Occlusal splint therapy included individualized fabrication, occlusal analysis, adjustments for optimal fit, and prescribed wear schedules. Follow-up included CBCT scans at specified intervals (three months and six months), with participant-reported outcomes collected. The data analysis was conducted using IBM SPSS Statistics for Windows, Version 22.0 (Released 2013; IBM Corp., Armonk, NY, USA). Paired t-tests or nonparametric equivalents were employed to assess changes in condylar position and joint morphology. Subgroup analyses were conducted to explore potential factors influencing treatment outcomes. The significance level was set at p < 0.05 for all statistical tests. Results The entire cohort (n = 148) had a mean age of 32.5 years (± 8.1), with a balanced gender distribution. Changes in condylar position revealed a statistically significant improvement (p = 0.03), with a mean decrease of 0.2 mm posttreatment. Joint morphology changes indicated increased joint space width (p = 0.01), improved disc position (p = 0.02), and nonsignificant alterations in bony structures (p = 0.10). Patient-reported outcomes demonstrated significant improvements in pain levels, jaw functionality, and satisfaction (all p < 0.001). Age and gender subgroup analyses showed consistent improvements in condylar position, joint morphology, and patient-reported outcomes across different groups. Conclusion Occlusal splint therapy demonstrated effectiveness in improving condylar position, joint morphology, and patient-reported outcomes in cases of moderate TMD with joint displacement. The findings underscore the potential of occlusal splint therapy as a viable intervention for managing TMD, providing valuable insights for clinicians and researchers.

Influence of CBCT filters and contrast adjustments on peri-implant buccal bone thickness measurement and blooming expression.

OBJECTIVES: To assess whether filter and contrast adjustments can improve the accuracy of CBCT in measuring the buccal bone thickness (BBT) adjacent to dental implants by reducing blooming artifacts. MATERIALS AND METHODS: Homogeneous bone blocks with peri-implant BBT of 0.3 mm, 0.5 mm, and 1 mm were scanned using the Orthophos SL system. Three dentists measured the BBT in 234 CBCT scans under different settings of contrast adjustments and 'Sharpen' filter activation. Additionally, implant diameter measurements were taken to assess blooming artifact expression. The differences between tomographic and actual measurements of BBT and implant diameter [(CBCT - actual) * 100 / actual] were subjected to Mixed ANOVA (α = 0.05). RESULTS: The group with the thinnest BBT (0.3 mm) had the greatest difference between tomographic and actual measurements (79.9% ± 29.0%). Conversely, the 0.5 mm (36.1% ± 38.4%) and 1 mm (29.4% ± 12.3%) groups exhibited lower differences (p < 0.05). 'Sharpen' filter activation reduced blooming expression since it resulted in a lower difference for implant diameter (p < 0.05), but it did not influence BBT measurements (p = 0.673). Contrast settings had no impact on BBT (p = 0.054) or implant diameter measurements (p = 0.079). CONCLUSION: Although filter activation reduced blooming artifacts, neither filter nor contrast adjustments improved the accuracy of CBCT in measuring peri-implant BBT; actual BBT influenced this task. CLINICAL RELEVANCE: When assessing the peri-implant buccal bone plate in the CBCT system studied, dental surgeons may find it beneficial to adjust contrast and apply filters according to their preferences, since such adjustments were found to have no adverse effects on the diagnostic accuracy of this task. The use of the 'Sharpen' filter may lead to improved representation of implant dimensions.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

Machine learning assisted 5-part tooth segmentation method for CBCT-based dental age estimation in adults.

BACKGROUND: The utilization of segmentation method using volumetric data in adults dental age estimation (DAE) from cone-beam computed tomography (CBCT) was further expanded by using current 5-Part Tooth Segmentation (SG) method. Additionally, supervised machine learning modelling -namely support vector regression (SVR) with linear and polynomial kernel, and regression tree - was tested and compared with the multiple linear regression model. MATERIAL AND METHODS: CBCT scans from 99 patients aged between 20 to 59.99 was collected. Eighty eligible teeth including maxillary canine, lateral incisor, and central incisor were used in this study. Enamel to dentine volume ratio, pulp to dentine volume ratio, lower tooth volume ratio, and sex was utilized as independent variable to predict chronological age. RESULTS: No multicollinearity was detected in the models. The best performing model comes from maxillary lateral incisor using SVR with polynomial kernel ( = 0.73). The lowest error rate achieved by the model was given also by maxillary lateral incisor, with 4.86 years of mean average error and 6.05 years of root means squared error. However, demands a complex approach to segment the enamel volume in the crown section and a lengthier labour time of 45 minutes per tooth.

Recommendation for reducing the crystalline lens exposure dose by reducing imaging field width in cone-beam computed tomography for image-guided radiation therapy: an anthropomorphic phantom study.

In cone-beam computed tomography (CBCT) for image-guided radiation therapy (IGRT) of the head, we evaluated the exposure dose reduction effect to the crystalline lens and position-matching accuracy by narrowing one side (X2) of the X-ray aperture (blade) in the X-direction. We defined the ocular surface dose of the head phantom as the crystalline lens exposure dose and measured using a radiophotoluminescence dosimeter (RPLD, GD-352 M) in the preset field (13.6 cm) and in each of the fields when blade X2 aperture was reduced in 0.5 cm increments from 10.0 to 5.0 cm. Auto-bone matching was performed on CBCT images acquired five times with blade X2 aperture set to 13.6 cm and 5.0 cm at each position when the head phantom was moved from - 5.0 to + 5.0 mm in 1.0 mm increment. The maximum reduction rate in the crystalline lens exposure dose was - 38.7% for the right lens and - 13.2% for the left lens when blade X2 aperture was 5.0 cm. The maximum difference in the amount of position correction between blade X2 aperture of 13.6 cm and 5.0 cm was 1 mm, and the accuracy of auto-bone matching was similar. In CBCT of the head, reduced blade X2 aperture is a useful technique for reducing the crystalline lens exposure dose while ensuring the accuracy of position matching.

Surgical treatment of nasal fractures may benefit from intraoperative 3D imaging.

This retrospective study aimed to assess the effects of the use of intraoperative three-dimensional (3D) imaging on outcomes in surgical treatment of nasal fractures. Furthermore, we investigated whether the use of intraoperative imaging improves outcomes and decreases the frequency of corrective surgeries compared to published literature. This retrospective descriptive study included patients who underwent operative treatment for nasal fractures with the use of intraoperative 3D imaging between January 2015 and January 2020 at a University Hospital. The primary outcome measure was patient satisfaction, which was assessed through patient charts about subjective esthetic problems and nasal obstruction. The secondary outcome measures were the number of intraoperative images and necessity of intra- and postoperative revisions. All the outcomes were evaluated using regression analysis. Of the 172 patients, secondary rhinoplasty and intraoperative revision were performed in 10 (6 %) and 93 (54 %) patients, respectively. Postoperatively, 19 (11 %) and 12 (7 %) patients complained of subjective esthetic problems and nasal obstruction, respectively. The intraoperative revision rate in patients undergoing surgical treatment of nasal fractures with intraoperative 3D imaging was >50 %. However, the incidence of postoperative secondary revision, nasal obstruction, and subjective esthetic problems was lower than that reported in the literature not having an intraoperative imaging. Our findings suggest that prompt quality control of the operative result enables immediate correction and prevents postoperative revision.

A study on volumetric change of mandibular condyles with osteoarthritis using cone-beam computed tomography.

This study aimed to quantitatively assess three-dimensional changes in the mandibular condyle with osteoarthritis using cone-beam computed tomography (CBCT). Pre- and post-treatment CBCT images of temporomandibular joints (TMJs) from 66 patients were used to assess longitudinal changes in condylar volume within individual patients using 3D slicer software. Total volume difference (dV), net increase (dV + , bone deposition), and net decrease (dV- , bone resorption) after treatment were analyzed based on clinical and radiological factors. Condyles with surface erosion at their first visit showed significantly decreased volume after treatment compared to condyles without erosion (p < 0.05). Amounts of bone resorption and deposition were higher in condyles with surface erosion (both p < 0.01). In patients with condylar erosion, the presence of joint pain was associated with a decrease in condylar volume and an increase in net resorption (both p < 0.01). When both joint pain and condylar erosion were present, patients with parafunctional habits showed reduced condylar volume after treatment (p < 0.05). Condylar volume change after treatment was negatively correlated with the duration of pain relief (R = - 0.501, p < 0.05). These results indicate that condylar erosion and TMJ pain could be significant variables affecting TMJ volume changes after treatment. Establishing appropriate treatment strategies is crucial for managing condylar erosion and TMJ pain.

Three-dimensional assessment of the maxilla after modified surgically assisted rapid expansion: a retrospective study.

OBJECTIVE: This retrospective study aims to assess the three-dimensional dentoskeletal effects and median palatal suture opening pattern in patients undergoing modified surgically assisted maxillary rapid expansion (SARME) without pterygoid plate detachment. METHODS: Twenty-eight patients submitted to modified SARME between 2009 and 2016 were retrospectively evaluated through cone-beam computed tomography (CBCT). Dental and skeletal measurements were taken at three different operative periods (before the expansion - T0; at the end of the activation of the Hyrax device - T1; and six months after the immobilization of the device - T2). Statistical analyses, including ANOVA and Pearson's correlation coefficient, were performed using SPSS software. RESULTS: SARME demonstrated significant transverse maxillary expansion (with an average of 6.05 mm) with a greater impact in the anterior region. Dental measurements, including canine and molar distances, exhibited significant changes over the operative periods. Bone measurements (ANS and PNS) presented small but significant alterations, including a slight inferior displacement of ANS during device activation. The nasal floor width increased, followed by a width reduction after immobilization. The median palatal suture predominantly exhibited a Type II (V-shaped) opening. CONCLUSION: The modified SARME presented a transversal direction increase and a super-lower skeletal displacement, with the anterior region being more affected than the posterior region. There was no change in the anteroposterior direction of the maxilla. Additionally, there was an increase in the linear dental measurements and a decrease in the angular measurement, with a positive correlation between the amount of posterior bone expansion and molar expansion as a result of the treatment in the analyzed period.

Stability of proximal mandibular anatomical structures following bilateral sagittal split osteotomy.

The aim of this study was to investigate the stability of the proximal mandibular reference structures that have been proposed in the literature for superimposition. Forty proximal mandibular segments of 20 patients who underwent bilateral sagittal split osteotomy (BSSO) for advancement were reconstructed from a pair of pre- and postoperative (2 years) cone beam computed tomography scans, and spatially divided into the mandibular condyle, the coronoid process, and 20 mandibular ramus regions. To assess the stability of the anatomical regions, the volumetric and surface discrepancy between the superimposed pre- and postoperative regions were calculated. One-sample t-tests were applied to analyse the statistical stability of the individual regions. Two statistically stable (P < 0.05) structures in the proximal segment of the mandible following BSSO were identified: (1) the posterior part of the mandibular ramus above the gonial angle and below the condylar neck, and (2) the sub-coronoid area below the coronoid process/mandibular notch. Using these stable structures for superimposition resulted in an assessment discrepancy in the condylar displacement of up to 1.1 mm and in the volumetric change of up to 2.8%. Hence, it is suggested that these two identified stable structures are used as reference areas when assessing condylar displacement and change using superimposition.

Diffuse idiopathic skeletal hyperostosis (DISH): Detection on dental radiologic examinations in two older adults and overview of the literature.

BACKGROUND: Diffuse idiopathic skeletal hyperostosis (DISH) is a potentially serious osteopathic disorder associated with coalescing ossifications of the anterior vertebrae and may be concomitant with a constellation of symptomatology and systemic comorbidities. There is limited dental literature describing this finding on panoramic radiographs and cone beam computed tomography (CBCT) scans. CASE PRESENTATIONS: Two case reports of DISH are provided. One patient manifested extensive ossifications along the cervical vertebrae and consequent episodes of dysphagia and hoarseness. The other affected patient's cervical ossification was found at an earlier stage of formation and without symptomatology. Panoramic radiography, cervical spine radiography, and CBCT examinations have been provided. CONCLUSION: Attending dental healthcare practitioners should carefully evaluate all areas of interest and surrounding fields of view when taking panoramic radiographs and CBCT scans for manifestations of DISH and other potential disorders of the cervical vertebrae. A suspected radiologic finding of DISH should prompt timely referral for comprehensive medical assessment to mitigate neurologic deficits and other comorbidities.

Comparative Evaluation of Accuracy of Adjacent Parallel Implant Placements Between Dynamic Navigation and Static Guide: A Prospective Study.

Aim The study aims to compare the accuracy of dynamic navigation (DN) and static guides (SGs) for simultaneous adjacent parallel placement of implants, the time taken for the surgery, and the ease of handling the instruments. Materials and methods This prospective trial was carried out at the Department of Implantology of Saveetha Dental College from October 2022 to February 2023. A total of 20 patients who needed simultaneous adjacent dental implants were allocated randomly into two groups: Group 1 SG surgery and Group 2 DN surgery. Forty implants were placed, 20 under DN and 20 under SG. Bucco-lingual displacement, apico-coronal displacement, mesiodistal displacement, and mesiodistal angulation were compared between the two groups. The patients' data in both groups were evaluated by operating surgeons along with the surgical time taken and the ease of handling of instruments. Results The 20 patients who underwent implant placement in the DN and SG groups all had adjacent missing teeth in posterior sites, including lower posteriors (70%) and upper posteriors (30%). There was improved precision in relation to the mesiodistal displacement and angulation of the anterior implant of the adjacent parallel implants. The mesiodistal displacement in Group 1 (SG) was 5.61 + 3.1 mm, which was higher than Group 2 (DN), which was 0.55 + 0.56 mm. The mesiodistal angulation was 3.1 + 2.9 degrees in Group 2 and 0.42 + 0.5 degrees in Group 1. The second implant had a significant difference (p < 0.005) in mesiodistal displacement, mesiodistal angulation, and bucco-lingual displacement. The difference between the intergroup surgical time (mean + SD) in Group 1 was 30 + 4.5 mins and in Group 2 was 60.7 + 10.1 mins, with p < 0.05 statistically significant. The comfort of the operator was better in the SG group. Conclusion Any digitally aided implant placement technique can improve placement accuracy but each has its downfalls. Achieving the highest levels of precision and long-lasting prosthetic results hinges on both the suitability of the chosen case and the expertise of the surgeon performing the implant placement.

Assessment of neurovascular channels in lateral maxillary sinus wall using cone-beam computed tomography: An imperative clinicians guide for implant placements.

Background: The aim of this study is to evaluate the location and radio morphometric features of the posterior superior alveolar artery (PSAA) in patients undergoing rehabilitation of posterior maxilla and other sinus augmentation surgical procedures by cone-beam computed tomography (CBCT). Materials and Methods: A total of 816 CBCT scans were included. Various radio morphometric measurements were done to assess the PSAA location, diameter, and distances to the sinus floor and alveolar crest. Results: The PSAA was mostly intraosseous in the maximum in the age group 31-51 years (56%), in males (53.4%), and in dentate patients (57.4%). The artery tends to be wider in older patients. Distances to the sinus floor or the alveolar crest tend to be shorter in women. Conclusions: This study suggests that CBCT is a valuable pre-surgical tool and the evaluation of the PSAA on CBCT images could reduce the likelihood of excess bleeding during surgery in the maxillary posterior region.

The Trend of Radiographic Healing after Root Canal Treatment in Teeth with Apical Periodontitis Based on Cone-Beam Computed Tomography: A 4-Year Longitudinal Study.

OBJECTIVES: The aim of this study was to observe the radiographic healing of periapical lesions after root canal treatment via volumetric measurements based on cone-beam computed tomography (CBCT) over 4 years. METHODS: In total, 162 single-root teeth from patients with chronic periapical periodontitis who underwent primary root canal treatment were included in this retrospective study. Follow-up visits were scheduled at 1, 2, and 4 years after treatment. The volume of radiolucency at pretreatment and follow-up were measured, and the radiographic outcomes were classified into 4 categories: absence, reduction, uncertain or enlargement. Reduction or enlargement was considered when the volumetric change in radiolucency was 20% or more. RESULTS: During the 4-year follow-up period, 128 teeth were reviewed at least once, including 3 extracted teeth. Of the remaining 125 teeth, the volume of radiolucency was reduced in 116 teeth (90.6%), uncertain in 5, and enlarged in 4 teeth during 1 to 4 years after treatment. Among the 43 teeth with reduced radiolucency at 1 year after treatment, 42 (97.7%) had continuing reduced lesions at 4 years. In the 2 teeth with enlarged radiolucency at 1 year, the volume of radiolucency doubled at 4 years. Cox regression analysis revealed that the preoperative radiolucency size was a risk factor for persistent periapical radiolucency. CONCLUSIONS: The efficacy of root canal treatment for apical periodontitis was predictable. When the radiolucency changed by 20% or more in volume on CBCT scans at 1 year after treatment, reversal of the radiographic healing tendency was rare. CLINICAL SIGNIFICANCE: The volumetric changes in radiolucency on CBCT could reflect trends in the healing process and may foster early clinical decision-making.

[The use of fixed expanders with orthodontic miniscrews support in children with mesial occlusion]. / Ispol'zovanie nes"emnykh rasshiritelei s vnutrikostnoi oporoi u detei s mezial'noi okklyuziei.

OBJECTIVE: Prevention of the development of pronounced skeletal abnormalities in patients with mesial occlusion. MATERIALS AND METHODS: Biometric analysis of control and diagnostic models of dentition was performed in 60 patients with dental anomalies before and after treatment in 3 mutually perpendicular planes to identify violations in the formation of dental arches by sagittal and transversal dimensions, and alveolar processes - by vertical dimensions (methods of A. Pont, G. Korkhaus). Measurements of 23 parameters of TRG and sections of CBCT were carried out using the modified Nad-Ars technique with analysis of skeletal parameters before and after treatment. Treatment was carried out using dilators for the upper jaw in combination with a facial mask and further dynamic observation using active retention devices. RESULTS: The results of treatment showed an increase in the length of the anterior segment of the upper dental arch by 2.8±0.55 mm (p<0.05 mm); expansion in the area of temporary molars by 2.85±0.65 mm (p<0.05); in the area of permanent molars by 2.75±0.55 mm (p<0.05); in the area of the apical basis of HF by 3.82±0.45 mm (p<0.05). The length of the lower dental arch in the anterior segment has not changed. Analysis of TRG parameters showed a significant increase in the values of

Effects of adenoid hypertrophy on nasopharyngeal airway ventilation: A computational fluid dynamics study.

OBJECTIVES: Adenoid hypertrophy causes impaired nasopharyngeal airways (NA) ventilation. However, it is difficult to evaluate the ventilatory conditions of NA. Therefore, this study aimed to analyze the nasopharyngeal airway resistance (NARES) based on computational fluid dynamics simulations and the nasopharyngeal airway depth (NAD) and adenoid hypertrophy grade measured on cephalometric cone-beam computed tomography images and determine the relationship between NAD and grade and NARES to ultimately assess using cephalometric measurements whether NA has airway obstruction defects. METHODS: Cephalogram images were generated from cone-beam computed tomography data of 102 children (41 boys; mean age: 9.14 ± 1.43 years) who received orthodontic examinations at an orthodontic clinic from September 2012 to March 2023, and NAD and adenoid grade and NARES values were measured based on computational fluid dynamics analyses using a 3D NA model. Nonlinear regression analyses were used to evaluate the relationship between NARES and NAD and correlation coefficients to evaluate the relationship between grade and NARES. RESULTS: NARES was inversely proportional to the cube of NAD (R2 = 0.786, P < 0.001), indicating a significant relationship between these variables. The resistance NARES increased substantially when the distance NAD was less than 5 mm. However, adenoid Grade 4 (75 % hypertrophy) was widely distributed. CONCLUSIONS: These study findings demonstrate that the ventilatory conditions of NA can be determined based on a simple evaluation of cephalogram images. An NAD of less than 5 mm on cephalometric images results in NA obstruction with substantially increased airflow resistance.